Description
C2 Scull Oarlocks:
Concept 2 scull locks with blue bushings for metric 13 mm pins.
Price per pair.
Scull Locks
$26.00
Priced per Pair. For 13mm Pins.
SKU: 04P61
Categories: Carbon Riggers, Hardware
Tags: concept 2, metric, pins, pitch-bushings, scull-locks
You may also like…
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Related Products
Foot Stretcher Fittings
Foot Stretcher Fittings: The classic foot stretcher fittings made by Martinoli in Italy. Options available: Circle Wedge Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Tube End Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Shoe Tie-Down Laces
Shoe Tie-Down Laces: Required equipment as per USRowing’s Rules of Racing. If you flip a boat, you need to be able to pull your feet out of the shoes. The shoe heel needs to move for rowing, but have strong … Read more
Double T-Bolts
Stainless Steel Double T-Bolts: –M6x35 for the F5 Foot Stretcher –M6x45 for the F4 Extra Stiff Foot Stretcher
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Drain Plugs
Drain Plugs: Made by Martinoli in Italy. Flexible rubber drain plugs fit into openings in the boat deck. The small nylon drain plug is made to be fixed to the hull. The plug is attached to the base — easy … Read more
Number Plate Holder
Number Plate Holder: From Martinoli, the number plate holder for bow numbers can be mounted with screws, Velcro®, or tape.
Dreher Seat Wheel Set
Dreher Seat Wheel Set: Compatible with Stämpfli/Janousek, Pocock, Hudson, Resolute, Empacher, Van Dusen, Fluidesign, BBG, Filippi, etc. We recommend changing all the wheels on a seat at the same time. Priced and sold as a set of 4 ball bearing wheels.