Description
Seat Tracks:
Black anodized seat tracks from Martinoli. Available in two lengths: standard (33″) and long (36″). The tracks are supplied complete with 4 holding bolts and wing nuts.
Priced per pair.
Seat Tracks
$40.00 – $43.00
Priced per Pair.
SKU: 06P551
Category: Hardware
Tags: accessoiries, Hardware, rowing-seat-track, seat, seat-track, track
You may also like…
Dreher Seat Wheel Set
Dreher Seat Wheel Set: Compatible with Stämpfli/Janousek, Pocock, Hudson, Resolute, Empacher, Van Dusen, Fluidesign, BBG, Filippi, etc. We recommend changing all the wheels on a seat at the same time. Priced and sold as a set of 4 ball bearing wheels.
Carl Douglas – AussieRail™ Slides
For customers looking for the best-in-class slides (tracks) for their boat, than look no further than Carl Douglas’ AussieRail™ Slides. These slides are hard-anodized for longevity and come complete with smooth no-bite ends to prevent “track bite”, provide extra comfort, … Read more
Seats Complete
Dreher Carbon Seat (Complete): Our Dreher Carbon Seat comes completely assembled with a carbon seat top, two-seat supports, two axles, four ball-bearing wheels, and wheel attachment hardware. Two-seat top sizes are available: medium (29 cm width) and large (31 cm … Read more
Related Products
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
Foot Stretcher Attachment Hardware
Foot Stretcher Attachment Hardware: We have a variety of Metric size 6 nuts and washers: M6 Wing Nut (A4 / 316 Stainless Steel) – used on foot stretcher attachments (circle wedges and tube ends). M6 Black Plastic Locking Wing Nut … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Seat Supports
Seat Supports: Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from the center of the axle to the top of the seat support where it attaches to the seat. … Read more
Double T-Bolts
Stainless Steel Double T-Bolts: –M6x35 for the F5 Foot Stretcher –M6x45 for the F4 Extra Stiff Foot Stretcher