Description
Carbon Rigger C-Cup:
Dreher carbon “C” shaped oarlock holder, used with side mounted carbon tubular riggers. Oar lock, special pin and hardware are not included.
Carbon Rigger C-Cup
$52.00
SKU: 04M43
Category: Carbon Riggers
Tags: c-cup, carbon, carbon-rigger, Dreher, lock, oar, oar-lock, pin, side mounted, top mounted, tubular rigger
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
NK EmPower Adapter Kit
NK EmPower Adapter Kit for Empacher Two Stay Riggers: Scullers with a bow mounted wing or carbon two-stay rigger that wish to use NK’s EmPower oarlock will need to upgrade the C-Cup on the rigger. Luckily, we have just the … Read more
Related Products
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
Oar Lock Adjustment Spacers
Thin Oar Lock Adjustment Spacers: Make height changes with thin oarlock spacers. Sized for 13 mm pins. Sold in packs of twenty.
Carbon Tubular Rigger Pin with or without Hardware
Carbon Rigger Pin – Carbon Tubular Rigger Part: Specially designed for use with the Dreher carbon C-cup on the Carbon Tubular Riggers. The 13 mm diameter stainless steel pin can be ordered with or without the accompanying hardware: Carbon Tubular Rigger … Read more
C2 Sweep Oarlock
Concept2 Sweep Oarlock: Blue metric pitch bushings included. Sold individually.
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Sweep Handle Clamp
Sweep Handle Clamp Assembly: The Carbon Sweep Handle Clamp secures the handle in the oar shaft. The curved carbon clamp is hidden inside the oar shaft with the hex head bolt on the outside. This item includes one sweep handle … Read more
Decals for Sweeps
Decals for Sweep Oars: Handle Decal (363 cm – 383 cm, 143″ – 151″) Sleeve Decal (250 cm – 268 cm, 98″ – 105″) Dreher Reflective Decal
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.