Description
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
$0.50
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Slotted Interface (RC-7) – Carbon Tubular Rigger Part: The carbon slotted interface (also known as “RC-7”) connects the side stay with the back stay. The slot allows for changes in spread. This part is epoxied into the end of a … Read more
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Carbon Side-Stay Tube: Carbon sidestay for Dreher side mounted carbon tubular riggers. Priced per sidestay. Please provide length of tube.