C2 Sweep Oarlock 
Carbon Sidestay - Tube Only 
Sidestay Assembly 
Rigger Shims Description
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
“Rigger Shims” has been added to your cart. View cart
Ruled Rigger Decal
$0.50
SKU: 04P54
Category: Carbon Riggers
Tags: carbon, decal, Dreher, measurement, rigger, ruler, sticker, tube rigger
You may also like…
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Related Products
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
Oar Lock Adjustment Spacers
Thin Oar Lock Adjustment Spacers: Make height changes with thin oarlock spacers. Sized for 13 mm pins. Sold in packs of twenty.
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Bent Arm Tubular Rigger Part
Bent Arm – Tubular Carbon Rigger Part: The Bent Arm is a black anodized threaded piece that inserts into the Delrin bushing of the backstay. The threading allows for length adjustments. The other end has two holes, offering a choice … Read more
Decals for Sweeps
Decals for Sweep Oars: Handle Decal (363 cm – 383 cm, 143″ – 151″) Sleeve Decal (250 cm – 268 cm, 98″ – 105″) Dreher Reflective Decal
Carbon Boat Attachment Piece for Mounting Rigger
Carbon Boat Attachment Piece (BAP) – Carbon Tubular Rigger Part: Carbon side stay attachment for mounting rigger to racing shell. The Boat Attachment Piece (BAP) is epoxied into the end of a side stay. This part comes in several different sizes … Read more
Sweep Handle Clamp
Sweep Handle Clamp Assembly: The Carbon Sweep Handle Clamp secures the handle in the oar shaft. The curved carbon clamp is hidden inside the oar shaft with the hex head bolt on the outside. This item includes one sweep handle … Read more
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more