Description
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
$4.00
Pack of 10 Thin Hex Nuts (M6).
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Bow Numbers: A regatta standard for over 35 years, Coffey bow numbers are sturdy and long lasting. The premium quality placards measure 5″ x 8″ and fit securely into bow number clips. Every racer or coach should have a complete … Read more
Drain Plugs: Made by Martinoli in Italy. Flexible rubber drain plugs fit into openings in the boat deck. The small nylon drain plug is made to be fixed to the hull. The plug is attached to the base — easy … Read more
Bow Ball: Required equipment per USRowing’s Rules of Rowing, make sure you have a bow ball on your boat and another in your toolbox. From Schröder Rowing Service, this white bow ball is essential to protect against puncture injuries.
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more
Large Nylon Drain Ports: Classic two-part hard nylon drain ports made by Martinoli in Italy. Consists of an outer ring that is fixed to the boat deck and a removable inner hatch cover. Used on Dreher Rec-Racers and FISA singles. … Read more
Rudders: Martinoli Rudders for pairs, fours and eights.