Description
Wheel Attachment Hardware for Single Action Seats.
316 Stainless Steel.
Set of 4 each: M6x20 Hex Head Bolt; M6 Lock Washer; M6 Flat Washer.
Wheel Attachment Hardware for Single Action Seats.
316 Stainless Steel.
Set of 4 each: M6x20 Hex Head Bolt; M6 Lock Washer; M6 Flat Washer.
Dreher Seat Wheel Set: Compatible with Stämpfli/Janousek, Pocock, Hudson, Resolute, Empacher, Van Dusen, Fluidesign, BBG, Filippi, etc. We recommend changing all the wheels on a seat at the same time. Priced and sold as a set of 4 ball bearing wheels.
Seat Supports: Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from the center of the axle to the top of the seat support where it attaches to the seat. … Read more
Boeshield Rust Protection Lubricant: Corrosion shield for use on metals parts. Especially good for protection in saltwater conditions. Great for increasing the longevity of wheel bearings. Sold in 1oz bottle. Boeshield was developed by Boeing for use in the aerospace industry … Read more
Double Action Wheels and Axles: The classic double action wheel and axle from Martinoli. Available in three sizes: 16.5 cm; 23 cm; and 28 cm. Priced per pair (four wheels and two axles).
Martinoli seat axles. Metric size 6 thread. For use with ball bearing rowing wheels. Available in a variety of lengths: 282 mm for 30 cm wheel base, 262 mm for 28 cm wheel base, 212 mm for 23 cm wheel … Read more
Dreher Black Seat Pad: At only 1 oz. this is the lightest weight seat pad we offer. It is 1/3 inch in thickness and is the best value for the quality. This seat pad has a heat bonded fabric cover and can … Read more
Just like all of your favorite toys, boats also need a bit of tender loving care from time to time. This year, before you hit the water again, give your single the tune-up it needs with our Sculling Tune-Up Pack. Included are … Read more
Carriage Frames: The classic Nylon Carriage Frame for double action seats from Martinoli. Available in two sizes: 16.5 cm and 23 cm. For 28 cm widths, two 16.5 cm undercarriage frames are used.
Dreher Carbon Seat (Complete): Our Dreher Carbon Seat comes completely assembled with a carbon seat top, two-seat supports, two axles, four ball-bearing wheels, and wheel attachment hardware. Two-seat top sizes are available: medium (29 cm width) and large (31 cm … Read more
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more