Description
C2 Scull Oarlocks:
Concept 2 scull locks with blue bushings for metric 13 mm pins.
Price per pair.
“Sweep Pin Assembly” has been added to your cart. View cart
Scull Locks
$26.00
Priced per Pair. For 13mm Pins.
SKU: 04P61
Categories: Carbon Riggers, Hardware
Tags: concept 2, metric, pins, pitch-bushings, scull-locks
You may also like…
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Related Products
Carbon Fins For BBG 1xs and 2xs
Carbon Fins For BBG Singles and Doubles: Dreher Carbon Fins are designed to fit BBG singles and doubles. Available in two sizes (small and large) and two styles (the classic Parallelogram shape and the newer Sailboard shape).
Set Screw for BBG Fins
Set Screw for BBG Fins: To be used with aluminum or carbon fins on BBG 1Xs or 2Xs.
Rudders
Rudders: Martinoli Rudders for pairs, fours and eights.
Number Plate Holder
Number Plate Holder: From Martinoli, the number plate holder for bow numbers can be mounted with screws, Velcro®, or tape.
Bow Ball
Bow Ball: Required equipment per USRowing’s Rules of Rowing, make sure you have a bow ball on your boat and another in your toolbox. From Schröder Rowing Service, this white bow ball is essential to protect against puncture injuries.
Large Nylon Drain Ports
Large Nylon Drain Ports: Classic two-part hard nylon drain ports made by Martinoli in Italy. Consists of an outer ring that is fixed to the boat deck and a removable inner hatch cover. Used on Dreher Rec-Racers and FISA singles. … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more